Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual page 143

Chapter 4 InfiniBand Commands
threshold
excess-buf-overruns
link-downs
link-recovery-errors
local-link-errors
rcv-constrnt-errors
rcv-errors
rcv-rate
rcv-rem-phy-errors
rcv-sw-relay-errors
symbol-errors
vl15-droppeds
xmit-constrnt-errors
xmit-discards
xmit-rate
int
Defaults
Performance monitoring is disabled by default.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cicso 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-write access
Use performance manager to do the following:
•
•
•
To monitor IB ports for errors, follow these steps:
•
•
•
•
OL-9163-02
Configures threshold values.
Configures the threshold for the number of "excess buffer overrun" errors.
Configures the threshold for the number of "link down" errors.
Configures the threshold for the number of "link recovery" errors.
Configures the threshold for the number of "local link integrity" errors.
Configures the threshold for the number of "receive constraint" errors.
Configures the threshold for the number of "receive" errors.
Configures receive rate thresholds.
Configures the threshold for the number of "receive remote physical"
errors.
Configures the threshold for the number of "receive remote relay" errors.
Configures the threshold for the number of "symbol" errors.
Configures the threshold for the number of "vl15 dropped" events.
Configures the threshold for the number of "transmit constraint" errors.
Configures the threshold for the number of "transmit discard" errors.
Configures transmit rate thresholds.
Threshold value (integer).
View IB port counters.
Test connectivity between two IB ports (test a connection).
Monitor any/all IB ports for errors, generating SNMP traps and log messages when user-defined
thresholds are exceeded.
Configure error thresholds.
(Optional) Configure specific ports and/or connections to monitor.
(Optional) Configure new start-delay and/or polling-period values.
Start performance monitoring.
Cisco SFS 7000 Series Product Family Command Reference Guide
ib pm
4-5