58
|
Handling Media and Printouts
Pre-Printing Checklist
Whenever you print on a new media type, follow these guidelines to
configure the media for printing:
Check the media packaging for print requirements, such as heating
•
temperatures.
Select a paper configuration number (1 to 30) for the media in the
•
printer's menu system.
Select these settings for the paper configuration using the information
•
supplied with your media:
PRINT MODE
•
PRE HEATER
•
PLATEN HEATER
•
POST HEATER
•
M/W ADJUSTMENT (MicroWeave
•
PAPER SUCTION
•
DRYING TIME
•
CARRIAGE MOVEMENT
•
PRINT MULTIPLE LAYER
•
Print a nozzle check pattern and clean the print heads, if necessary.
•
Perform a 500 mm Line Feed Adjustment to fine-tune the paper feeding
•
position.
Print a sample pattern and select the best setting to further refine the
•
paper feeding position.
Print a bidirectional alignment pattern and select the best setting to
•
align the print heads.
Select the paper configuration number using the printer's menu system
•
and print.
Make a note of the media type and number on the back of the Quick
Reference Guide and hang the guide on the printer using the supplied hook
for easy reference.
58
)
®