Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 23

Caution: Make sure you
close the spigot valve all
the way to prevent spills.
Caution: Make sure you
remove the plastic from
the end of the tube or
waste ink may be unable
to drain and may back up
into the printer.
Also make sure to
securely attach the tube
to the tank to prevent
spills.
3. Place the waste ink tank into the bracket on the stand and close the
spigot valve all the way, as shown.
4. Remove the plastic from the ends of the waste ink tube and sensor cable.
Then connect the sensor cables and securely attach the waste ink tube to
the tank.
Be careful not to crimp the waste ink tube as you attach it.
Setting Up the Printer
23
|
Waste ink tank
IMPORTANT
Remove
plastic from
end of tube
before
connecting it
23