Loading Media - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

42 | Handling Media and Printouts
WARNING: Do not touch the
post heater, paper feed slot,
or platen during printing, or
while switching media when
the heaters are operating.
These areas are hot and may
burn you.
The following table lists the paper sizes you can use:
Media width
Core diameter
Maximum external roll
diameter
Maximum roll weight
Maximum thickness
Always test samples of media in the printer before purchasing large
quantities or printing large jobs. See page 56 for instructions on setting up
paper configurations.

Loading Media

Follow these guidelines, as well as those included in your media package,
when handling media:
Roll media is heavy, so two people are required to load it onto the
•
printer.
Avoid touching the printable surface with your bare hands. Fingerprints
•
may affect print quality. Handle media by the edges or use cotton
gloves.
Be careful not to bend or scratch the media.
•
Keep unused media in its original packaging and store it in a cool, dry
•
place to maintain quality. Avoid storing your printouts where they will
be exposed to high temperature, humidity, or direct sunlight.
12 to 64 in. (300 to 1625 mm) wide
3 in. core
6.7 in. (170 mm)
66 lb (30 kg)
0.01 in. (0.3 mm); Low head height adjustment
0.05 in. (1.3 mm); High head height adjustment
42