Connecting The Power Cord - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

Caution: The printer
requires 22 Amps of
power. Make sure the
outlet provides that
power or plug the cables
into two different outlets.
Do not use an outlet that
is controlled by an
automatic timer or wall
switch. Otherwise, you
may accidentally shut off
the printer and cause
damage.

Connecting the Power Cord

You need to use the two power cords that came with the printer and the
third power cord that came with the Auto Take-Up Reel to power the
printer.
1. Route the two printer power cords through the cable supports as shown.
Setting Up the Printer
3 power cords
31
| 31