54
|
Handling Media and Printouts
Note: Raising the print
head height may affect
your print quality, so run a
test print before printing
any large jobs.
If you need to clean the print head, press and hold the
three seconds. The Pause light flashes and
LCD display.
Cleaning is finished when the Pause light stops flashing and
appears on the LCD display.
Adjusting the Print Head Height
If you loaded thick media, or notice any smearing on sharply curled media or
after printing at a high speed, the print head may be rubbing against the
media. To avoid this, you can adjust the print head height (platen gap).
1. Make sure the printer has finished printing.
2. Open the front cover.
54
button for
Menu
appears on the
CLEANING
READY