Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 115

Menu setting
PAPER ORIGIN SETUP
AUTO TAKE-UP REEL
HEAD FAN
REGULAR CLEANING
INITIALIZE SETTINGS
PAPER SETUP menu (see page 117 for details)
PAPER TYPE
PAPER SETUP
MAINTENANCE menu
CLEANING (VERY LIGHT)
CLEANING (LIGHT)
CLEANING (MEDIUM)
115
Printer Parts and Controls Summary
Description
Selects the beginning point (origin) for printing
(horizontal)
0.00inch to 32.00inch (0mm to 800mm)
Controls media feeding when using the Auto
Take-Up Reel.
ON prevents feeding the media backward from
the Auto Take-Up Reel
OFF to turn off this function if you remove the
Auto Take-Up Reel
Controls operation of the head fan. Leave this
setting turned ON.
Selects the interval at which to automatically clean
the print head after completing a print job to retain
print quality (in hours). The timer is reset when the
printer is turned off and on, the interval is
changed, or you clean the print head manually.
OFF
1h to 6h, 9h, 12h, 18h, 24h
Resets the PRINTER SETUP menu settings to
their default settings.
Selects the type of media you want to print on.
Selects whether to print with default settings for
all media setup options (STANDARD) or to set up
a paper number (1 to 30) with custom settings
(recommended).
Starts a very light print head cleaning cycle (uses
less ink than LIGHT cleaning cycle); see page 74
for details.
Starts a standard print head cleaning cycle; see
page 74 for details.
Starts a strong print head cleaning cycle when a
LIGHT cleaning cycle does not unclog the print
head fully (uses more ink than LIGHT cleaning
cycle); see page 74 for details.
| 115