Replacing The Flushing Pad - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

84 | Maintaining the Printer
Note: If you need more
flushing pads, purchase
an Additional Printer
Maintenance Kit (1 year
supply). See page 10 for
ordering information.
16. If ink has hardened on the print head casings and cannot be removed
with a dry cleaning swab, you need to clean them using the optional
Print Head Cleaning Kit. Follow step 9 and step 10 to moisten the
cleaning swab, then clean the print head casings again, as described in
step 15.
17. Dispose of the used ink cleaner, swabs, and gloves in compliance with
industrial waste disposal laws and local government ordinances as
required in your area.
18. Replace the maintenance cover, close it, and press it until it locks in
place.
19. Press the Pause button to return the printer to the

Replacing the Flushing Pad

Once a year, you need the replace the printer's flushing pad. You may also
need to replace it if you notice ink smears on your media or if the pad
becomes damaged or excessively soiled.
You will need the replacement flushing pad and plastic gloves that came in
the Maintenance Kit and the metal tray included with your printer.
Plastic gloves Flushing pad
84
state.
READY
Metal tray