Cutting Off Prints - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

62 | Handling Media and Printouts
9. Examine the patterns and determine which number in each set has the
smallest gaps in the lines. Press the u or d button to select the number
for the first set, then press
10. Repeat step 9 for the rest of the pattern sets.
11. When you are finished, press the Pause button to exit.

Cutting Off Prints

When you finish printing and need to remove your printouts, follow the
steps below to cut off the prints.
1. Make sure
READY
2. Press u or d to adjust the cutting position of the media, if necessary.
(When you are using the Auto Take-Up Reel, you cannot feed the
media backward.)
3. Open the front cover.
4. If you are not using the Auto Take-Up Reel, hold your print and pull
slightly to remove any slack.
.
appears on the LCD display.
62