Installing The Printer On The Stand - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

Caution: Do not remove
the packing tape from the
printer at this point. The
tape holds the printer
parts in place as you
complete installation.
Do not lift the printer
from beneath the black
plastic areas in back; lift it
from the metal area in the
middle.
WARNING: Six or more
people are required to lift
the printer.

Installing the Printer on the Stand

1. Have six people lift the printer onto the stand. If you like, you can lift
the printer using two 1-inch × 84-inch steel pipes (available at hardware
stores). Insert the pipes into the guides beneath the printer.
Front of
the stand
Carrying bar method
Front of
the stand
Setting Up the Printer
21
| 21