Setting Up Paper Configurations; Creating Paper Configurations - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

56 | Handling Media and Printouts
Tip: Make a note of the
paper configuration
number you use for each
type of media on the back
on the Quick Reference
Guide that came with the
printer. Keep the booklet
handy by mounting it on
the side of the printer
using the hook that came
with it.

Setting Up Paper Configurations

Before printing on your loaded media, create a paper configuration (a group
of print settings) for the media type. Create a configuration for each media
type you use (up to 30 types) and select the desired configuration whenever
you print on that media. This ensures that the printer uses optimum print
quality settings on all your custom media.
Use the checklist on page 58 whenever you print on a new media type to
configure the printer for printing on that media.

Creating Paper Configurations

To create a paper configuration, make sure the media you want to configure
is loaded in the printer. Then follow these steps:
1. Press the button.
Menu
2. Press the d button until
.
Menu
3. Press d to highlight
4. Press d to select the paper configuration number (1 to 30) that you
want to use for this media type. Then press
5. Select the following settings for your media based on the information
supplied in the media package (see page 117 for details):
• PRINT MODE
• PRE HEATER
• PLATEN HEATER
• POST HEATER
• M/W ADJUSTMENT
• PAPER SUCTION
• DRYING TIME
• CARRIAGE MOVEMENT
• PRINT MULTIPLE LAYER
PAPER SETUP
again, then press
PAPER SETUP
(MicroWeave
56
is highlighted, then press
again.
Menu
.
Menu
)
®