Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 118

118 | Printer Parts and Controls Summary
Note: All three heaters
must reach the selected
temperature before
printing can start.
Option and parameters
HEAD ALIGNMENT
BI-D ALL
PRE HEATER
OFF
30°C to 50°C
(86 °F to 122 °F)
PLATEN HEATER
OFF
30°C to 50°C
(86 °F to 122 °F)
118
Description
Adjusts the alignment of the print head to help
eliminate vertical misalignment. See page 61 for
details.
Sets the temperature of the heater that heats the
media before printing. See the instructions that
came with your media to select the correct
temperature for the pre heater.
Sets the temperature of the heater beneath the
print head that warms the ink. See the instructions
that came with your media to select the correct
temperature for the platen heater.
Pre Heater
Platen Heater