Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 83

Caution: Do not touch
the print head or the tip
of the swab with your
hands to prevent oil on
your skin from damaging
the print head.
Do not moisten the
cleaning swab with water
or it may damage the
print head.
Do not let the cleaning
swab touch any other
part of the printer or it
may stain it with ink.
Do not reuse a cleaning
swab; dirt or ink from the
swab may damage the
print head.
14. Use a flashlight and the reflective base of the maintenance bay to check
if there is any dust or ink on the casings surrounding the print heads.
You can clean the areas on the underside of the print heads, shown in
gray below.
Print head
casing
15. Put on a plastic glove, then use a cleaning swab to clean around the print
head casings as shown. (You may want to place the metal tray in the
maintenance bay to catch any ink that may fall off.) Wipe back and
forth, and up and down around the print head casings.
Maintaining the Printer
83
| 83