Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 50

50 | Handling Media and Printouts
3. Move the paper lever to the
media down to the Auto Take-Up Reel.
4. If the media is not positioned in the center of the empty take-up core,
adjust the core's horizontal position using the adjustment knob on the
side of the Auto Take-Up Reel controller. Turn the knob clockwise to
move the core left, or counter-clockwise to move the core right.
position so you can pull the
Released
Empty take-up
core
50
Horizontal
adjustment
knob