Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 14

14 | Introduction
Keep all combustible materials or liquids away from the printer.
•
Exposure of these materials or liquids to the heated platen may cause a
fire.
Do not move the paper release lever unless instructed to do so. Moving
•
the lever at the wrong time may cause the print head to touch the
pressure rollers and cause a malfunction.
When not using the printer for one week or more, clean the print heads
•
once a week to preserve print quality. If the print head is not cleaned, it
may get clogged.
Clean the cleaning wiper once a month, or if blurs or gaps appear on
•
printouts after cleaning the print head.
Replace the flushing pad once a year, or if ink smears on your media or
•
the pad becomes damaged.
Take care not to spill waste ink from the flushing pad when replacing it.
•
If waste ink gets on the grid roller beneath it, the ink may damage it and
paper may not feed correctly.
Clean the print head casing if dust or ink accumulates on it. If you do
•
not clean it, print quality may decline.
Do not bend or pull the waste ink drain tube. The ink may leak and
•
damage the printer.
Do not attempt to service the printer yourself.
•
Power down the printer from the control panel, unplug the printer, and
•
refer servicing to qualified service personnel under the following
conditions: the power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the cabinet damaged; the
printer does not operate normally or exhibits a distinct change in
performance.
The printer uses two power systems. Unplug both power cords before
•
servicing the printer; otherwise there is a risk of electric shock.
For California customers only:
The lithium batteries in this product contain
Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
14