Placing The Roll On The Printer - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

Caution: Do not release
the paper lever while the
P Power light is flashing,
or you may damage the
printer.

Placing the Roll on the Printer

1. Make sure the printer is turned on.
appears on the LCD display.
2. Make sure the P Power light is not flashing, then release the paper lever.
LEVER RELEASED
3. Flip up the levers to release the roll paper holders on the back of the
printer, then slide the holders apart.
Handling Media and Printouts
PAPER OUT. LOAD PAPER
appears on the LCD display.
43
| 43