Handling Media And Printouts; Selecting Media For Your Printer - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

Chapter 2:
Handling Media
and Printouts
The Epson Stylus Pro GS6000 prints on a variety of roll media in widths
from 12 to 64 inches (300 to 1625 mm).
This chapter includes the following information:

Selecting media for your printer

•
Loading media
•
Checking the print quality
•
Adjusting the print head height
•
Setting up paper configurations and print using them
•
Adjusting the feeding position
•
Aligning the print head
•
Controlling media curl
•
Cutting off prints
•
Removing prints from the Auto Take-Up Reel
•
Replacing roll media
•
Selecting Media for Your Printer
The Epson Stylus Pro GS6000 prints on a variety of solvent media products
up to 64 inches (1625 mm) in width. Unlike other Epson Stylus Pro
printers, Epson is not the primary media provider for this class of printers.
Our goal is to partner with the industry leaders in solvent media and work
with them to assure compatibility.
There are a large variety of media selections offered by each of our media
partners. You can select from a full range of vinyls, banners, films, fabrics,
and specialty media, as well as a wide selection of protective overlaminate
materials. All products are readily available in the market and all of our
Epson Stylus Pro GS6000 resellers carry products from these companies.
In addition to the solvent media available from our partners, Epson will offer
a few solvent media products that will optimize image and output quality for
specialty applications. Please check http://www.proimaging.epson.com to
see a list of Epson Stylus Pro GS6000 media and to find links to our
partner's websites.
41
41