Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 102

Epson stylus pro gs6000
Hide thumbs Also See for Stylus Pro GS6000 Setup and:
Table of Contents

Advertisement

102
|
Solving Problems
Message
INK CARTRIDGE ERROR
REPLACE CARTRIDGE
INK COVER OPEN
CLOSE RIGHT AND LEFT
INK COVERS
INK COVER OPEN
CLOSE LEFT INK COVER
INK COVER OPEN
CLOSE RIGHT INK COVER
INK LOW
LEVER RELEASED
LOAD PAPER
LEVER RELEASED
LOWER THE PAPER SET
LEVER
MAINT COVER OPEN
CLOSE RIGHT MAINT
COVER
MAINT COVER OPEN
CLOSE LEFT MAINT
COVER
MAINTENANCE
REQUEST
NO CARTRIDGE
INSTALL INK CARTRIDGE
Explanation
There is a problem with the
installed cartridge.
The indicated ink covers are
open.
Ink cartridge(s) are nearly
expended (printing continues).
Paper is not loaded.
Paper lever is released.
The indicated maintenance
cover is open.
A printer part may need to be
replaced soon.
Ink cartridge(s) not installed.
Response
Remove the cartridge and make sure there is
no condensation on it. Leave the cartridge
uninstalled for four hours or more before
reinstalling it.
If you reinstall the cartridge and still see this
error message, install a new cartridge. See
page 75 for instructions.
Close the indicated ink covers.
Make sure you have replacement cartridges
available; see page 75. Print quality may decline
when ink is low.
Load paper and set the lever to the Secured
position. See page 43 for instructions.
Set the paper lever to the Secured position.
Start printing again from the beginning for best
results.
Close the indicated maintenance cover.
Note the code number and contact Epson as
described on page 11.
Install ink cartridge(s); see page 75.
If you just replaced a cartridge when this
message appeared, do not reinstall the
cartridge that caused the error.
102

Advertisement

Table of Contents
loading

Table of Contents