Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 29

Caution: Remove the
tape and brackets from
the carriage rail slowly
and carefully to avoid
letting the tape touch any
other part of the carriage.
Caution: Be sure to
remove both the bracket
and the bolt from the
print head.
To prevent paper jams,
don't place the bolt back
in the printer.
5. Open the front cover. Then remove the tape securing the paper holder
plates, and the tape and brackets securing the carriage rail.
6. Remove both the bolt and bracket securing the print head. Save the bolt
and bracket in case you need to ship the printer.
Setting Up the Printer
29
| 29