Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 82

82 | Maintaining the Printer
WARNING: Before handling
the ink cleaner, read the
Material Safety Data Sheet
(MSDS) for your printer. You
can download it from
Epson's support website at
epson.com/support (U.S.)
or epson.ca/support
(Canada).
Make sure your workspace
is well ventilated and free of
any open flame before
opening the ink cleaner.
Keep ink cleaner out of the
reach of children.
Do not let ink cleaner
contact your skin, eyes, or
clothing. If it gets on your
skin or in your eyes, wash
them well with water.
Avoid ingesting the cleaner
or inhaling its vapors. If you
accidentally swallow any ink
cleaner, do not vomit.
Consult a doctor as soon as
possible.
Use ink cleaner only for
cleaning the cleaning wiper
or the print head casing. It
may damage other parts of
your printer.
9. Put on a plastic glove and pour ink cleaner into the plastic cup up to the
10 ml line.
10. Dampen a new cleaning swab with ink cleaner, being careful not to let it
drip.
11. Repeat step 7 to clean the cleaning wiper and capping assemblies.
12. Close the maintenance cover and press it until it locks in place.
13. To clean the print head casings, open the left maintenance cover, then
lift the cover off of the printer to remove it; this makes it easier to clean
the print head casings.
10 ml line
82