Media Handling; Media Handling Precautions - Epson SureColor P6570 Series User Manual

Media Handling

See these sections to load and handle media on your product.
Note: The illustrations in this section show a dual roll model, but the instructions are the same for single
roll models unless noted otherwise.

Media Handling Precautions

Roll Paper Handling
Cut Sheet Handling
Creating Custom Paper Settings
Paper Feed Adjustment
About Auto Take-up (Dual Roll Models Only)
Available Epson Papers
Borderless Paper Type Compatibility
Supported Paper Widths
Paper or Media Type Settings - Printing Software
Selecting the Paper Settings for Each Source - Control Panel
Media Handling Precautions
Follow these guidelines as you load media in your product and remove printed media:
• Maintain a constant room temperature when using Epson special media; optimal conditions are
between 59 °F (15 °C) and 77 °F (25 °C), with 40 to 60% humidity. Changes in temperature and
humidity may cause paper to become wavy or curled.
• Avoid touching the printable surface of the paper with your bare hands; moisture and oils from your
hands can affect print quality.
• Do not rub your hands along the edges of the media; the sharp edges could cut you. Wear cotton
gloves when handling media, if possible.
• Media is very heavy, so use at least two people to carry the rolls.
• Do not fold the media or otherwise damage its printable surface; do not get the media wet.
60