Installing and Configuring the Edge Switch 2/24
9. Click Next. A new screen displays for selecting ports for the alerts, as shown in
Figure
2–42.
Figure 2–42: New Threshold Alerts dialog box—third screen
10. Either select Port Type or Port List.
•
If you select Port Type, selecting either E_Ports, F_Ports or FL_Ports will
cause this alert to generate for all ports configured as E_Ports, F_Ports or
FL_Ports respectively.
•
If you select Port List, you can select individual ports by clicking the check
box by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports will clear the
check marks by each port number.
2-60
edge switch 2/24 installation guide