Configure Operating Parameters; Switch Page-Parameters Tab - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Installing and Configuring the Edge Switch 2/24

Configure Operating Parameters

The switch must be set offline to configure operating parameters. To configure the
parameters:
1. Set the switch offline as follows:
a. Choose Operations at the left side of the window. The Operations window
opens with the Switch tab displayed.
b. At the Switch tab, click the Online State tab, then click Set Offline. The
message "Your operations changes have been
successfully activated" displays.
2. Choose Configure at the left side of the window. The Configure window opens
with the Ports tab displayed.
3. At the Configure window, click the Switch tab, then click the Parameters tab.
The Switch page displays with Parameters tab selected, as shown in
Figure 2–6: Switch page—Parameters tab
2-12
Figure
edge switch 2/24 installation guide
2–6.