Switch Binding - Membership List Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Installing and Configuring the Edge Switch 2/24
Figure 2–36: Switch Binding - Membership List dialog box
2. If nicknames are configured (through the HAFM application) and are to be
displayed instead of WWNs, click Display Options. The Display Options dialog
box displays . If nicknames are not configured, go to
3. Click the Nickname radio button, then click OK. The dialog box closes and
nicknames appear in the Switch Binding - Membership List dialog box.
4. Perform one of the following:
• To allow a switch port connection to a device listed in the Node List panel,
select the WWN or nickname and click Add>>. The device WWN or
nickname moves to the Switch Membership List panel.
• To prohibit a switch port connection to a device listed in the Switch
Membership List panel, select the WWN or nickname and click <<Remove.
The device WWN or nickname moves to the Node List panel.
NOTE: Device connectivity and membership list edits are subject to the rules defined under
"Online State and Switch
2-52
Binding" on page 2–49.
step 4.
edge switch 2/24 installation guide