9. Click Next. A new screen displays for selecting ports for the alerts, as shown
in
Figure
Figure 3–17: New Threshold Alerts dialog box—third screen
10. Choose either Port Type or Port List.
•
•
11. Click Next. A final screen displays to provide a summary of your alert
configuration, as shown in
director product manager user guide
3–17.
For Port Type, choose either E_Ports or F_Ports will cause this alert to
generate for all ports configured as E_Ports or F_Ports respectively.
For Port List, you can choose individual ports when you click the check
box by each port number or set all ports. Choosing Set All Ports places a
check mark by each port number. Choosing Clear All Ports will clear the
check marks by each port number.
Figure
3–18.
Configuring the Director
3–31