5. To add a WWN or nickname for a device not connected to the switch, click
Detached Node. The Add Detached Node dialog box displays.
6. Type the device WWN or nickname and click OK. The WWN or nickname
appears in the Switch Membership List.
7. Click Activate to enable the changes and close the Switch Binding -
Membership List dialog box.
Configure Switch Ports
To configure switch Fibre Channel ports:
1. At the Hardware View for the selected switch, choose Configure > Ports. The
Configure Ports dialog box (open systems mode) displays.
Figure 2–37: Configure Ports dialog box
edge switch 2/24 installation guide
Installing and Configuring the Edge Switch 2/24
2-53