New Threshold Alerts Dialog Box—Third Screen - HP StorageWorks Director 2/140 Installation Manual

8. Enter the interval in minutes in which throughput is measured and threshold
9. Click Next. A new screen displays for selecting ports for the alerts, as shown
Figure 39: New Threshold Alerts dialog box—third screen
10. Choose either Port Type or Port List.
11. Click Next. A final screen displays to provide a summary of your alert
Director 2/140 Installation Guide
notifications can occur. The valid range is 5 minutes to 70,560 minutes.
in Figure 39.
For Port Type, choosing either E_Ports or F_Ports will cause this alert to
generate for all ports configured as E_Ports or F_Ports, respectively.
For Port List, you can choose individual ports by clicking the check box
by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports will clear the
check marks by each port number.
configuration, as shown in
Installing and Configuring the Director
Figure 40.
87