Installing and Configuring the Edge Switch 2/24
3. Click New. The New Feature Key dialog box displays, as shown in
Figure 2–27: New Feature Key dialog box
4. Type the feature key (case-sensitive xxxx-xxxx-xxxx-xx format) and click OK.
The Enable Feature Key dialog box displays, as shown in
Figure 2–28: Enable Feature Key dialog box
5. Click Activate to enable the feature key. When the feature key is enabled, the
switch performs an IPL, but is not automatically set to open systems operating
mode.
2-40
Figure
Figure
2–28.
edge switch 2/24 installation guide
2–27.