Task 12: Configure Open Systems Management Server (Optional); Task 13: Set Switch Date And Time; Configure Open Systems Management Server Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Task 12: Configure Open Systems Management Server
(Optional)
Perform this task to configure the open systems management server (OSMS) and
enable OSI host control of the switch. Implementing host control requires installation
of a SAN management application on the OSI server. Management applications
include Veritas SANPoint Control (Version 1.0 or later), or Tivoli NetView (Version
6.0 or later).
To configure the open systems management server:
1. At the Hardware View for the selected switch, choose Configure >
Management Server. The Configure Open Systems Management Server
dialog box displays, as shown in
Figure 2–29: Configure Open Systems Management server dialog box
2. Allow or prohibit host (OSI server) control by selecting Host Control
Prohibited. If a check mark displays, host control is prohibited, preventing a host
management program from changing configuration and connectivity parameters
on the switch. The host program has read-only access to configuration and
connectivity parameters. An unchecked box allows a host management program to
change configuration and connectivity parameters.
3. Click Activate to enable a change and allow or prohibit open systems host
control.

Task 13: Set Switch Date and Time

The Edge Switch 2/24 product manager log entries are stamped with the date and time
received from the switch. To set the effective date and time for the switch:
1. At the Hardware View for the selected switch, choose Configure > Date/Time.
The Configure Date and Time dialog box displays, as shown in
edge switch 2/24 installation guide
Installing and Configuring the Edge Switch 2/24
Figure 2–29.
Figure 2–30.
2-41