Declaration Of Conformity For Products Marked With Fcc Logo-U.s. Only; Modifications; Network And Serial Cables - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Declaration of Conformity for Products Marked with FCC
Logo—U.S. Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
For questions regarding your product, refer to http://thenew.hp.com.
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
Product Regulations Manager
3000 Hanover St.
Palo Alto, CA 94304
Or call 1-650-857-1501
To identify this product, refer to the part, Regulatory Model Number, or product
number found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to
this device that are not expressly approved by Hewlett-Packard Company may void
the user's authority to operate the equipment.

Network and Serial Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI
connector hoods in order to maintain compliance with FCC Rules and Regulations.
edge switch 2/24 installation guide
Regulatory Compliance Notices
A–3