Operating Tolerances; Laser Information; Laser Specifications - 2 Gb - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Operating Tolerances

Table B–6 lists heating and cooling specifications, shock tolerances, vibration,
acoustical noise and inclination.
Table B–6: Operating Tolerances
Specification
Heat dissipation
Cooling airflow
clearances
Shock and vibration
tolerance
Acoustical noise
Inclination

Laser Information

Three configurations of cards with fixed optics will be provided for each of the
connector types: four extended long-wave ports, four long-wave ports, and four
short-wave ports.
Table B–7: Laser Specifications - 2 Gb
Part Number
300836-B21
Long wave -
35 Km
300835-B21
Long wave -
10 Km
300834-B21
Short wave
edge switch 2/24 installation guide
49 watts (167 BTU/hr)
Right and left sides: 1.3 cm (0.5 inches)
Front and rear: 7.6 cm (3.0 in)
Top and bottom: No clearance required
60 Gs for 10 milliseconds without nonrecoverable errors
70 dB "A" scale
10° maximum
Transceivers
on UPM Card Length
4 Extended 1310 nm
Long wave
4 Long wave 1310 nm
4 Short wave 850 nm
Value
Wave Media/
Distance
9/125 µm
Single-mode:
1 m–35 Km
9/125 µm
Single-mode:
1 m–10 Km
50/125 µm
Multimode:
2 m–500 m
62.5/125 µm
Multimode:
1 m–200 m
Technical Specifications
Standard
100-SM-LL-L
100-SM-LL-L
100-M5-SN-I
B–5