Configure And Enable E-Mail Notification; Configure E-Mail Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Edge switch 2/24 installation guide
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Installing and Configuring the Edge Switch 2/24

Configure and Enable E-mail Notification

Perform this procedure to configure and enable e-mail addresses and simple mail
transfer protocol (SMTP) server addresses to receive e-mail notification of switch (and
other managed product) events. The addresses must be configured at the HAFM
application, then enabled. See
page 2–65 for instructions on testing this notification feature.
To configure and enable e-mail and SMTP server addresses:
1. At the Product View, choose Maintenance > Configure E-Mail. The Configure
E-Mail dialog box displays, as shown in
Figure 2–45: Configure E-Mail dialog box
a. Type the IP address or DNS host name of the SMTP server in the SMTP
server field. Use 64 alphanumeric characters or less. It is recommended the IP
address be used.
b. For the E-Mail Addresses fields, type the e-mail addresses of up to five
recipients who should be informed of system events. Use 64 alphanumeric
characters or less for each entry.
2. To enable e-mail transmission to configured addresses, click Enable E-Mail
Event Notification. A check mark displays in the box when transmission is
enabled.
NOTE: The enable function must also be activated for each switch through the Edge
Switch 2/24 product manager application. E-mail notification can be active for some
switches and inactive for others.
2-64
"Task 15: Test Remote Notification
Figure
(Optional)" on
2–45.
edge switch 2/24 installation guide

Advertisement

Table of Contents
loading

Table of Contents