Periodically Synchronize Date And Time; Task 14: Configure The Edge Switch 2/24 Product Manager Application; Date And Time Synced Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Periodically Synchronize Date and Time

To set the switch to periodically synchronize date and time with the HAFM
application:
1. Click Periodic Date/Time Synchronization to select the option (check mark in
the box). The Date and Time fields are greyed out and not selectable. Perform
one of the following options:
• Click Activate to enable synchronization and close the Configure Date and
Time dialog box. The switch date and time synchronize with the HAFM
application date and time at the next update period (at least once daily).
• Click Sync Now to synchronize the switch and HAFM application
immediately. The Date and Time Synced dialog box displays, as shown in
Figure
Figure 2–31: Date and Time Synced dialog box
2. Click OK to synchronize the date and time and close the Date and Time Synced
dialog box, then click Activate to enable synchronization and close the Configure
Date and Time dialog box.
Task 14: Configure the Edge Switch 2/24 Product Manager
Application
Selectively perform the following configuration tasks for the Edge Switch 2/24
product manager application according to the customer's installation requirements.
For additional information, refer to the hp StorageWorks edge switch 2/24 product
manager user guide.
• Identify the switch to the HAFM application.
• Configure switch parameters.
• Configure fabric parameters.
• Configure switch binding.
• Configure switch ports.
edge switch 2/24 installation guide
2–31.
Installing and Configuring the Edge Switch 2/24
2-43