Management Page-Snmp Tab - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Figure 2–10: Management page—SNMP tab
a. For each trap recipient to be configured, type a community name of 32
alphanumeric characters or less in the associated Community Name field.
The community name is incorporated in SNMP trap messages to ensure
against unauthorized viewing or use.
b. Click the check box in the Write Authorization column to enable or disable
write authorization for the trap recipient (default is disabled). A check mark in
the box indicates write authorization is enabled. When the feature is enabled,
a management workstation user can change sysContact, sysName, and
sysLocation SNMP variables.
c. Type the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the associated Trap Recipient field. Use 64
alphanumeric characters or less. It is recommended the IP address be used.
d. The default user datagram protocol (UDP) port number for trap recipients
is 162. Type a decimal port number in the associated UDP Port Number field
to override the default.
3. Click Activate to save the information. The message "Your changes to
the SNMP configuration have been successfully
activated" displays.
edge switch 2/24 installation guide
Installing and Configuring the Edge Switch 2/24
2-19