Download Print this page

HP StorageWorks SN6000 User Manual: Installing Feature License Keys; Feature Licenses Dialog Box

Fibre channel switch quicktools switch management.
Hide thumbs

Advertisement

Table 15
Factory default configuration settings
Setting
Location
Trap Enabled
Trap Port
Trap Address
Trap Community
Read Community
Write Community
Port State
Port Speed
Port Type
Call Home Setup
Call Home Profile
Default Zone
Merge Auto Save
Discard Inactive

Installing feature license keys

A feature license key is a password that enables you to upgrade your switch. To obtain a feature license
key, contact a switch distributor or authorized reseller. License keys vary according to the features you
purchase. The following license key features are available:
The HP StorageWorks SN6000 Stackable 20Gb ISL Upgrade LTU enables the XPAK ports to transmit at
20 Gb/s instead of the default 10 Gb/s.
The HP StorageWorks SN6000 Port Activation Upgrade LTU enables additional SFP ports in increments
of four on the HP StorageWorks SN6000 Stackable 8Gb 12-port Single Power Fibre Channel Switch
for totals of 16, 20, or 24 ports.
To install a license key and upgrade the switch:
1.
Open the faceplate display for the switch you want to upgrade.
2.
Select Switch > Features.
3.
In the Feature Licenses dialog box
The Add License Key dialog box is displayed.
Figure 38

Feature Licenses dialog box

Value
Undefined
False
162
Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Public
Public
Private
Online
Auto-detect
GL
<undefined>
<undefined>
Allow
True
False
(Figure
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
38), click Add.
77

Advertisement

   Related Manuals for HP StorageWorks SN6000

Comments to this Manuals

Symbols: 0
Latest comments: