Install Feature Keys (Optional) - HP StorageWorks Edge Switch 2/12 Installation Manual

Install Feature Keys (Optional)

Perform this procedure to install one or more of the following optional features:
After purchasing a feature, obtain the required feature key by following the
instructions in this section. A feature key is an alphanumeric string consisting of
both uppercase and lowercase characters. The total number of characters may
vary. The key is case sensitive and must be entered exactly, including dashes. The
following is an example of a feature key format:
After obtaining the feature key, install the feature as follows:
1. Choose Operations > Feature Installation to display the Feature Installation
Figure 25: Operations page—Feature Installation tab
Edge Switch 2/12 Installation Guide
Flexport Technology - A Flexport Technology switch is delivered at a
discount with only four ports enabled. When additional port capacity is
required, the remaining ports are enabled (in four-port increments) through
purchase of this feature.
Full-Fabric Capability - This feature allows Fibre Channel ports to be
configured as E_Ports, G_Ports, or GX_ports.
XxXx-XXxX-xxXX-xX.
page (Figure 25).
Installing and Configuring the Edge Switch 2/12
65