Configuring Director Date And Time; Setting Date And Time Manually - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Configuring the Director

Configuring Director Date and Time

The Director 2/140 Product Manager log entries are stamped with the date and time
received from the director. Use these steps to set the effective date and time for the
director.
NOTE: The director and HAFM synchronize at least once daily.
1. At the Hardware View page, click the Configure menu.
2. Choose Date/Time from the drop-down menu. The Configure Date and Time
dialog box displays, as shown in
3. Set director date and time manually, or set for periodic updates. For specific
instructions, see the following sections:
• "Setting Date and Time
• "Synchronizing Date and
Figure 3–13: Configure Date and Time dialog box

Setting Date and Time Manually

Use these steps to set the director date and time manually.
1. At the Configure Date and Time dialog box, click the Periodic Date/Time
Synchronization check box to deselect the option (no check mark in the box).
The grayed-out Date and Time fields activate.
2. Click the Date fields that require change, and type numbers in the following
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YYYY): greater than 1980
3–26
Figure 3–13.
Manually" on page 3–26
Time" on page 3–27
director product manager user guide