Configure Date And Time - HP StorageWorks Edge Switch 2/12 Installation Manual

2. Click Activate to save the information. The message "Your changes to

Configure Date and Time

Perform this procedure to configure the effective date and time for the switch. To
set the date and time:
1. Choose Configure > Switch > Date/Time. The Switch page displays with a
Figure 16: Switch page—Date/Time tab
Edge Switch 2/12 Installation Guide
the identification configuration have been
successfully activated" displays.
highlighted red Date/Time tab selected
a. Click the Date fields that require change, and enter numbers in the
following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b. Click the Time fields that require change, and enter numbers in the
following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
Installing and Configuring the Edge Switch 2/12
(Figure 16).
51