Test Remote Notification Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

HAFM Server Setup and Configuration
Perform the following to test remote notification:
1. Enable call-home event notification through the HAFM server.
2. Open the Products View page. Choose Maintenance > Test Remote
Figure 32: Test Remote Notification dialog box
3. Check the Call Home and E-Mail check boxes, depending on which features
4. Click Send Test. Call-home and e-mail test messages are transmitted
5. Click OK.
6. Depending on the features you are testing, verify that the test was successful:
62
a. In the Products or Fabrics View page, choose Maintenance >
Configure Call Home Event Notification.
b. The HAFM Configure Call Home Event Notification dialog box
displays.
— If a check mark displays in the check box, call-home is enabled.
— If a check mark does not display in the check box, click the box to add
a check mark.
Notification. The Test Remote Notification dialog box displays, as shown in
Figure 32.
you want to test.
(depending on the features you chose to test) and an Information dialog box
displays.
— Call-home–Confirm with the HP technical support representative
assisting you with configuration of the call-home feature that the
call-home test was successful.
— E-mail event notification–Verify that the intended users received e-mail
event notifications.
HAFM Server for Windows 2000 Installation Guide