Managing the SAN Switch 2/16
Management Overview
The switch is managed using TCP/IP protocol, in-band over Fibre Channel, or
out-of-band by connecting to the Ethernet port. The management functions allow
the administrator to monitor fabric topology, port status, physical status, and other
information to aid in system debugging and performance analysis.
The switch is compatible with the following management interfaces:
Optional Management Features
Refer to the HP StorageWorks SAN Switch 2/16 Version 3.1.x Release Notes for a
complete list of management features enabled on the switch.
Displaying the Optional Feature Licenses
Use these steps to display optional features installed on your switch.
1. Log in to the switch as the admin user.
2. At the command line, issue the licenseShow command.
60
Command Line Interface (CLI) via a Telnet connection — For more
information refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x
Procedures Guide and the HP StorageWorks Fabric OS Version 3.1.x/4.1.x
Reference Guide.
Standard SNMP applications — For more information refer to the HP
StorageWorks Version 3.1.x/4.1.x Management Information Base Reference
Guide.
Web Tools — Provides an easy-to-use Graphical User Interface (GUI),
allowing the SAN administrator to monitor and manage entire fabrics and
individual switches and ports from a standard workstation. Web Tools
provides you with the advantage of being virtually in front of any fabric,
switch, or port. For more information refer to the HP StorageWorks Web Tools
Version 3.1.x/4.1.x User Guide.
This command displays the license keys that have been entered for the switch
and the features enabled by those licenses.
SAN Switch 2/16 Version 3.1.2 Installation Guide