Changing A User Account Password; User Account Administration Dialog Box-Remove Account - HP StorageWorks 8/20q User Manual

7. Click Close to close the User Account Administration dialog box.
Figure 43 User Account Administration dialog box—Remove account

Changing a user account password

A user can change the password for their account, but only the Admin account user can change the
password for another user's account. If the user's original password is not known, the Admin account user
must remove the account and then add the account with the new password.
To change the password for an account on a switch:
1. Select a switch or stack in the fabric tree.
2. Select Switch > User Accounts to open the User Account Administration dialog box. For a stack, select
Stack > User Accounts.
3. Click the Change Password tab to open the Change Password tab page
4. If you selected a stack, choose a switch from the Initial Configuration drop-down list. Changes that you
make to this switch are distributed to the other switches in the stack.
5. Select the account (Login) name from the list of accounts at the top of the dialog box.
6. Enter the old password and the new password, and then verify the new password in the corresponding
fields.
7. Click Change Password.
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide
(Figure 44).
81