Tandberg Data MSERIES RMC USER User Manual page 85

Tape Alert E-mail Message Error
Flag Type
4 Soft Error
5 Hardware Failure
6 Hardware Failure
9 Hardware Failure
13 Hardware Failure
14 Hardware Failure
20 Soft Error
22 Soft Error
30 Hardware Failure
31 Hardware Failure
33 Soft Error
40 Hardware Failure
41 Soft Error
43 Operator Access
44 Hardware Failure
45 Hardware Failure
Tandberg Data M-Series Remote Management Card User's Guide
Description
Media can no longer be written or read, or performance is
severely degraded
The drive can no longer read data from the tape
The drive can no longer write data to the tape
Write command attempted to a write-protected tape
Tape snapped or cut in the drive where media can be
ejected
Tape snapped or cut in the drive where media cannot be
ejected
The drive has a head clog or needs cleaning
The cleaning tape has expired
The drive has a hardware fault that requires a reset to
recover
The drive has a hardware fault that requires a power cycle
to continue
Error recovery action
Library mechanism is having trouble communicating with
the tape drive
Stray tape left in library after previous error recovery
Library door open
The library mechanism had a hardware fault that is not
mechanically related
Library magazine not present
71