Library Statistics; Accessing Library Statistics - Tandberg Data MSERIES RMC USER User Manual

Chapter 4 ALERT Library Management

Library Statistics

Library Statistics
Accessing Library
4
Statistics
42 Tandberg Data M-Series Remote Management Card User's Guide
Field Description
This field indicates the current SCSI ID of the device.
SCSI ID
New SCSI ID Using the pull-down menu, the SCSI ID can be
modified for either the library or the drives. Each
device must have a separate and unique SCSI ID. Each
drive also displays its current SCSI ID and, using the
pull-down menu, allows you to assign a new SCSI ID.
SCSI ID changes do not take effect until you press
Note:
The read-only Library Statistics page allows you to view specific
information about the library and the number of times specific
functions have been performed.
To view library statistics:
In the navigation frame of the RMC Home page, press
1
. The management frame displays the
Statistics
page as shown in figure 18.
.
Apply
4
Library
Library Statistics