Tandberg Data MSERIES RMC USER User Manual page 76

E-mail Message Error
FSC Code Type
2613 Soft Error
261A Hardware Failure
2624 Hardware Failure
2625 Hardware Failure
2634 Hardware Failure
2636 Hardware Failure
2637 Hardware Failure
263B Soft Error
263C Soft Error
263E Hardware Failure
263F Hardware Failure
2640 Hardware Failure
2641 Hardware Failure
26B8 Soft Error
26B9 Soft Error
26BA Soft Error
26BB Soft Error
26BC Soft Error
26BD Soft Error
26D8 Hardware Failure
26D9 Hardware Failure
26DA Hardware Failure
26DB Hardware Failure
26DC Hardware Failure
26DD Hardware Failure
4200 Soft Error
62 Tandberg Data M-Series Remote Management Card User's Guide
Description
Requested action cannot be carried out without a cartridge in the
hand
The hand action 'completed' with no cartridge detected in the
source
The (nvr spec'd) xy build does not provide access to the cleaner slot
The elevator vertical position is still unknown
The inserted magazine has not been pushed fully home
The elevator X axis offset is too great; likely build error
The elevator is set too far back on the hand axis; likely build error
The cleaning tape in use has expired
The autoclean cycle has loaded a noncleaning or invalid tape
The cartridge is not fully in the elevator; manual intervention
required
Manual intervention and power cycle are required
Detail is not known, but manual intervention and power cycle
required
The fixed slot check has detected a fixed slot
Drive 1 in this frame has no cartridge to unload
Drive 2 in this frame has no cartridge to unload
Drive 3 in this frame has no cartridge to unload
Drive 4 in this frame has no cartridge to unload
Drive 5 in this frame has no cartridge to unload
Drive 6 in this frame has no cartridge to unload
Attempt to initialize Drive 1 in this frame before it has become
available
Attempt to initialize Drive 2 in this frame before it has become
available
Attempt to initialize Drive 3 in this frame before it has become
available
Attempt to initialize Drive 4 in this frame before it has become
available
Attempt to initialize Drive 5 in this frame before it has become
available
Attempt to initialize Drive 6 in this frame before it has become
available
NVR CRC invalid and contents probably corrupt