Cartridge Movement - Tandberg Data MSERIES RMC USER User Manual

Cartridge
4
Movement
Tandberg Data M-Series Remote Management Card User's Guide
Cartridges can be moved individually within the same library, or in
a multiframe environment, from one frame to another. Refer to
Library Status for a physical view of the library frames to determine
the identification of the appropriate bins for the cartridge
movement.
To move an individual tape cartridge from one position in the
library to another position:
Enter the current location type of the tape cartridge.
1
• (tape drive)
Drive
• Bin
• Port
• Fixed Slot
• Hand
• Elevator
Enter the current position of the tape cartridge.
2
Enter the desired location type of the tape cartridge.
3
• (tape drive)
Drive
• Bin
• Port
• Fixed Slot
Enter the desired position of the tape cartridge. Use the position
4
as displayed in the fields below the Cartridge Movement
section.
Press . A
5 Apply Results
complete.
Press to return to the
6 OK
Chapter 4 ALERT Library Management
page displays indicating the movement is
page.
Library Status
Library Status
37