Using The Management Console Web; Figure 1 M-Series Remote Management Card Home Page - Tandberg Data MSERIES RMC USER User Manual

Chapter 1 RMC Server Management
Management Console Web Pages
Figure 1 M-Series
Remote Management
Card Home Page
Banner and
link to the
Tandberg Data
Web site
Navigation
frame
Status icon
Management
frame
Using the
Management
Console Web
1
Pages
4 Tandberg Data M-Series Remote Management Card User's Guide
The first page that displays when you access the Management
Console Web pages is the RMC
This page includes information on the library status as follows:
• Unable to communicate with library
• Library is available
• Library is unavailable
—initializing
—demo running
—diagnostic running
The status
Unable to communicate with library
communications problem between the RMC and the library, such
as a bad serial connection from the RMC to the library, or a
conflicting baud rate between the library and the RMC.
The RMC communicates with the library at the library's
Note:
default baud rate of 38400. You may use the menu on
library's front panel to check or set the library's baud
rate.
page as shown in
Home
indicates a
figure 1.