Test E-Mail; Table 6 E-Mail Configuration Fields - Tandberg Data MSERIES RMC USER User Manual

Table 6 E-mail
Configuration Fields
3

Test E-mail

Tandberg Data M-Series Remote Management Card User's Guide
Field
From E-mail Account
Outgoing E-mail Server
DNS Address
Press . A
3 Apply Results
has been saved.
Press to return to the
4 OK
The Test E-mail option is intended as a verification that the mail
configuration has been successfully completed. To verify the
information, press
Send
This test only sends to e-mail addresses in the
Note:
Administrative E-mail list on the Message Configuration
page.
Description
Remote_Management_Console is the
default account. The name entered here
must be a valid address on the e-mail
server specified in the Outgoing E-mail
Server field.
Do not add the domain name
(@xxx) in this field
types require an account to be created. If
you have problems, see your network
administrator.
Name of the server designated for
-
outgoing e mail, such as
Domain name server address, for
example,
123.123.22.12
address of your server providing DNS
name resolution services.
page indicates the mailer configuration
Message Configuration
to send a test message.
Chapter 3 ALERT E-mail
E-mail Configuration
. Not all e-mail server
mail2.com
. This is the IP
page.
31