Date And Time Configuration; Accessing Date And Time Configuration; Table 2 Network Configuration Fields - Tandberg Data MSERIES RMC USER User Manual

Chapter 1 RMC Server Management

Date and Time Configuration

Table 2 Network
Configuration Fields
Date and Time Configuration
Accessing Date
and Time
1
Configuration
8 Tandberg Data M-Series Remote Management Card User's Guide
Field
Use DHCP
Hostname
Domain
IP Address
Subnet Mask
Default Gateway
The date and time can be set from the Management Console Web
pages.
To access the
Date and Time Configuration
Description
Select if your network utilizes DHCP for dynamic
IP addressing. In the event a DHCP server is
unavailable, the other fields will apply. The
default value is
Enabled
View or set the hostname for the RMC, for
example, the DNS name. The default value is
PMC300-[MAC address]
hostname, no spaces are allowed. Underscores are
acceptable.
View or set the domain for the RMC, for example,
Tandberg.com is the domain for Tandberg Data.
The default value is the
View or set the IP address for the RMC. The
default IP address is
192.168.1.1
View or set the subnet mask for the RMC. The
default subnet mask is
View or set the default gateway for the RMC. The
default value is
[default for your gateway or blank]
Change the value only as required by your
network.
.
. When entering a
.
[local domain]
.
.
255.255.255.0
page:
.
1