Library Configuration - Tandberg Data MSERIES RMC USER User Manual

Chapter 4 ALERT Library Management

Library Configuration

Library Configuration
40 Tandberg Data M-Series Remote Management Card User's Guide
Field Description
Displays
Cleaning
Needed
This informational message permits you to schedule
the drive cleaning. If the condition is allowed to
persist, the drive eventually moves to the
Required
cleaning is performed.
Displays
Cleaning Tape
Expired
expired.
Displays
Cleaning
Required
will not function until cleaning is performed.
Displays
Hardware Error
display is
If the tape load is complete, displays
Load Complete
display is
Displays status and whether the hand is available for
OK to Operate
Handle
operation.
Displays
Compression
Enabled
Cartridge Displays
Unloaded
ejected.
Cartridge Displays
Ejected
The Library Configuration page allows you to view or configure the
SCSI ID Configuration of the library and drives.
if the tape drive is in need of cleaning.
Yes
state and the drive will not function until
if the cleaning cartridge in the drive has
Yes
if cleaning is required. The tape drive
Yes
if a hardware error is detected. Default
Yes
.
No
.
No
or depending on setting.
Yes No
if the cartridge is unloaded but not
Yes
if the cartridge is ejected.
Yes
Cleaning
. Default
Yes
4