Adding E-Mail Recipients; Deleting E-Mail Recipients; E-Mail Configuration; Figure 13 E-Mail Configuration - Tandberg Data MSERIES RMC USER User Manual

-
Adding E mail
3
Recipients
-
Deleting E mail
3
Recipients

E-mail Configuration

Tandberg Data M-Series Remote Management Card User's Guide
To add e-mail recipients:
Access the
1 Message Configuration
see Accessing Message
In the
2 Add Recipient
address next to the message type. To add more than one e-mail
recipient at a time, separate each e-mail address with a comma.
Press . A
3 Apply Results
been added.
Press to return to the
4 OK
To delete e-mail recipients:
Access the
1 Message Configuration
see Accessing Message
Press the down arrow next to the
2
desired message type.
Press to highlight the e-mail address you wish to delete.
3
Only one e-mail recipient may be deleted at a time.
Note:
Press . A
4 Apply Results
been deleted.
Press to return to the
5 OK
The
E-mail Configuration
information for the ALERT E-mail feature, and to send test
messages. This information must be entered by the customer before
any ALERT E-mail options will work.
page. For more information,
Configuration.
column of the page, enter the e-mail
page indicates the e-mail recipient has
Message Configuration
page. For more information,
Configuration.
Delete Recipient
page indicates the e-mail recipient has
Message Configuration
page allows you to define the e-mail server
Chapter 3 ALERT E-mail
E-mail Configuration
page.
section of the
page.
29
3